3) ASSEMBLY Clean all parts. As a general rule, replace oil seals and O- ring. Coat the sliding surfaces of all parts with engine oil or grease before installing. (1) Fix seven slipper seal(7) and O-ring(9), to body(1). (2) Fit O-ring(8) to shaft(2). 45078DA12 Set shaft(2) on block, tap body(1) with a plastic hammer to install. (3) 45078DA13 (4) Fit shim(5), spacer(4) and retainer ring (13) to shaft(2). (5) Fit O-ring(10) to body(1). (6) Fit shim(6) to shaft(2). 45078DA11 8-146