Fit back up ring(12) to gland(3). Put the backup ring in the warm water of 30~50 12 C. Fit O-ring(11) to gland(3). 11 50078CY05 (2) Assemble piston assembly Check for scratches or rough surfaces. If found smooth with an oil stone. Coat the outer face of piston(17) with hydraulic oil. 8-158(2) 210-7 Fit piston seal(17) to piston. Put the piston seal in the warm water of 60~100 17 C for more than 5 minutes. After assembling the piston seal, press its outer diameter to fit in. 50078CY06 Fit wear ring(18) and dust ring(19) to piston(14). 18 18 19 19 17 14 50078CY07 8-162