(2) Disassembly Apply pressure on spring(4) with a press. The spring is under a large installed load. This is dangerous, so be sure to set properly. Spring set load : 24375 kg (53737 lb ) Remove bolt(10), spring washer(11) and lock plate(9). Remove lock nut(8). Take enough notice so that the press which pushes down the spring, should not be slipped out in its operation. Lighten the press load slowly and remove bracket(2) and spring(4). 45078UC03 Remove rod(3) from body(1). Remove grease valve(12) from rod(3). 45078UC04 Remove rod seal(5), back up ring(6) and dust seal(11). 45078UC05 8-174