hyundai R510LC-7 — 10. UNDERCARRIAGE

(3) Assembly Install dust seal(7), back up ring(6) and rod seal(5) to body(1). When installing dust seal(7) and rod seal(5), take full care so as not to damage the lip. 45078UC05 Pour grease into body(1), then push in rod(3) by hand. After take grease out of grease valve mounting hole, let air out. If air letting is not sufficient, it may be difficult to adjust the tension of crawler. Fit grease valve(12) to rod(3). Tightening torque : 13.0 m (94 1.0 kgf 7.2 lbf ft ) 45078UC04 Install spring(4) and bracket(2) to body (1). Apply pressure to spring(4) with a press and tighten lock nut(8). Apply sealant before assembling.

During the operation, pay attention specially to prevent the press from slipping out. 45078UC06 8-175