7) BYPASS CUT SPOOL This valve is providing the bypass cut spool at the lowest stream of (upper stream of the low pressure relief valve) the neutral passage(L1, R1). As the port pa10(pa11) is pressurizing and the bypass cut spool(L, R) is pushed, the neutral passage(L1, R1) is closed. The oil discharged from port P1 flows together into the passage(S8-2, see 2-32 page) of bucket section via passage( ), poppet(S8-3) and the oil discharged from P2 port flows together into the passage(S4-2) of service section via the passage( ) and poppet(S4-3, see 2-32 page). 8) PARALLEL ORIFICE FOR ARM The arm 1 and arm 2 section of this valve has orifices in the parallel circuit for arm.
These orifices controls the speed of arm at combined operation. The parallel circuit of arm 2 section is connected to the passage(S9-2, see 2-35) through orifice(Rc6) in the edge of the poppet(S9-3) from the parallel passage(R3), the parallel circuit of arm 1 section is connected to the passage(S5-2, see 2-35) through orifice(Lc9) in the edge of the poppet(S5-8) from the parallel passage(L3). 45071MC12 2-37