6. RELIEF VALVE OPERATION 1) MAIN RELIEF VALVE (1) This relief valve is built-in between the neutral passage(HP) and low pressure passage(LP), and the pressure oil fills up chamber(D) inside via orifice of main poppet(C). Thus the sleeve(E) and the main poppet(C) are securely seated by difference area of A an B. 45071MC17 (2) When the pressure in neutral passage(HP) reaches the setting force of spring, pilot poppet(F) is opened. The oil flows around poppet and into the low pressure passage(LP) via hole(G).
45071MC17-1 (3) When above flow is formed, the pilot poppet is opened; the pressure of chamber(D) drops, the main poppet(C) is opened and then the oil directly flows into the low pressure passage(LP). 45071MC17-2 (4) High pressure setting pilot signal(Pi) : ON The piston(H) moves to left by pilot pressure(Pi); set pressure of spring rises, making high pressure setting. 45071MC17-3 2-43