2) OVERLOAD RELIEF VALVE (1) This relief valve is built-in the cylinder port(HP) and the low pressure(LP), and the pressure oil fills up camber(G) inside via hole of piston(C). Thus the sleeve(K) and the main poppet(D) are securely seated by difference area of A and B. 45071MC18 (2) When the pressure in cylinder port(HP) reaches the setting force of spring, the pilot poppet(E) is opened. The oil flows around poppet and into the low pressure passage(LP) via hole(H). 45071MC18-1 (3) When above flow is formed, the pilot poppet(E) is opened. The pressure drops before and behind orifice(I); piston(C) moves to right and the piston(C) is seated at the tip of poppet(E). 45071MC18-2 2-44