honda — Maintenance

11) Remove the six 6 mm hex. cap nuts and the six head cover washers, and remove the cylinder head cover. [1] CYLINDER HEAD COVER [2] HEAD COVER WASHER (6) [3] 6 mm HEX. CAP NUT (6) 12) Release the pressure regulator control tube from the two 3.5 mm tube clips of the silencer duct assembly. Remove the harness band clip, that clamps the main wire harness, from the silencer duct assembly. 13) Remove the breather tube from the 18.5 mm clamp and the guide of the silencer duct assembly. [1] SILENCER DUCT ASSEMBLY [2] 18.5 mm CLAMP [3] BREATHER TUBE [4] PRESSURE REGULATOR CONTROL TUBE [8] GUIDE [7] MAIN WIRE HARNESS [5] 3.5 mm TUBE CLIP [5] 3.5 mm TUBE CLIP [6] HARNESS BAND CLIP 3-11