14) Remove the four 6 x 25 mm flange bolts and the four 6 mm washers, and remove the silencer duct assembly. [2] SILENCER DUCT ASSEMBLY 6 x 25 (4) [1] 6 mm WASHER (4) 15) Attach the wrench to the 16 x 49 mm washer bolt on the crankshaft pulley as shown. Turn the crankshaft pulley clockwise. [2] 16 x 49 mm WASHER BOLT [1] WRENCH 16) Align the cutout in the crankshaft pulley with the “ ” mark on the chain case. Do not turn the crankshaft pulley counterclockwise. [3] CRANKSHAFT PULLEY [3] CRANKSHAFT PULLEY [4] CUTOUT [5] CHAIN CASE [6] ” MARK 3-12