honda — Engine Cover/Cover Lock

e. HOOK BRACKET ASSEMBLY [1] COVER LOCK BOLT 1) Apply grease to the cover lock bolt installation part of the hook bracket. 2) Install the lock adjusting spring, 12 mm washer and the hook damper on the hook bracket. [2] HOOK DAMPER 3) Apply grease to the flanged part of the cover lock bolt. Apply grease to the straight part under the flange of the cover lock bolt, too. Install the cover lock bolt on the hook bracket. [3] LOCK ADJUSTING SPRING 4) Position the 6 mm washer and 6 mm hex. nut on the cover lock bolt and tighten the 6 mm hex. nut securely. [7] 12 mm WASHER [4] 6 mm WASHER [6] HOOK BRACKET [5] 6 mm HEX. NUT f.

HOOK BRACKET ASSEMBLY INSTALLATION 1) Install the four 6.5 x 10 x 11.5 mm distance collars on the engine cover (Rear L./R. side hook brackets only). [2] HOOK BRACKET ASSEMBLY [1] 6 x 20 mm SOCKET BOLT (2) [Rear L./R. sides only] (1) [Front side only] Install the three 6.5 x 10 x 11.5 mm distance collars on the engine cover (Front side hook bracket only). 2) Position the hook bracket assembly on the engine cover and secure it with the two 6 x 20 mm socket bolts (Rear L./R. side hook brackets only). Position the hook bracket assembly on the engine cover and secure it with the 6 x 20 mm socket bolt and the 6 x 16 mm socket bolt (Front side hook bracket only).

[4] 6 x 16 mm SOCKET BOLT [Front side only] [3] 6.5 x 10 x 11.5 mm DISTANCE COLLAR (4) [Rear L./R. sides only] (3) [Front side only] 4-4