6) Loosen the two 5 x 10 mm rivet screws and remove the two 14 mm clips. [1] 14 mm CLIP (2) [2] 5 x 10 mm RIVET SCREW (2) 7) Remove the three 6 x 25 mm screws and the eleven 6 x 17 mm special bolts from the L./R. engine under covers. [2] R. ENGINE UNDER COVER [1] L. ENGINE UNDER COVER [3] 6 x 17 mm SPECIAL BOLT (11) [4] 6 x 25 mm SCREWS 8) Detach the L. engine under cover from the projection of the L. side cover bracket. [1] L. ENGINE UNDER COVER [2] PROJECTION [3] L. SIDE COVER BRACKET 4-10