honda — Engine Cover/Cover Lock

3) Remove the 6 mm E-ring from the cover open shaft. [2] UNDER COVER FRONT BRACKET Remove the cover lock bushing B in a manner of bringing it to the lock lever return spring side. With the return spring compressed with the bushing B, hold the cover open shaft at a slightly inclined angle. Remove the cover open shaft with care not to let its head contact the under cover front bracket. [3] HEAD 4) Remove the cover lock bushing B, 8 mm washer, and the lock lever return spring from the cover open shaft. Check the cover lock bushing B for scores, scratches and other damage. Replace the cover lock bushing B with a new one if necessary.

[5] 6 mm E-RING 5) Remove the 6 mm E-ring, 8 mm washer and the cover lock bushing A from the front lock. [1] FRONT LOCK Check the cover lock bushing A for scores, scratches and other damage. Replace the cover lock bushing A with a new one if necessary. [2] 6 mm E-RING 6) Lower the front lock and detach the hook of the cover lock hook spring from the hole in the under cover front bracket. [3] 8 mm WASHER [4] COVER LOCK BUSHING A Remove the cover lock bushing from the under cover front bracket and hold it at the front lock side. 7) Set the front lock in the position shown.

With the front lock set at a slightly inclined angle in the position shown, remove the front lock from the under cover front bracket. [7] BRACKET CAP Remove the cover lock bushing and the cover lock hook spring from the front lock. 8) Remove the bracket cap. [6] COVER LOCK BUSHING [5] COVER LOCK HOOK SPRING [1] FRONT LOCK 4-22 [1] COVER OPEN SHAFT [4] COVER LOCK BUSHING B [4] COVER LOCK BUSHING B [7] LOCK LEVER RETURN SPRING [6] 8 mm [1] COVER OPEN SHA EN OCK B [4] COVER L BUSHING 1] COVER OPEN SHA [7] LOC LEV RET SPR K ER URN ING