5) Remove the two 8 x 30 mm hex. bolts and the two 8 mm washers, then remove the under cover front bracket. [1] UNDER COVER FRONT BRACKET [2] 8 mm WASHER (2) [3] 8 x 30 mm HEX. BOLT (2) DISASSEMBLY: 1) Remove the 6 mm E-ring and the 8 mm washer from the lock front shaft. 2) Remove the lock front shaft from the under cover front bracket. Remove the cover lock lever, two cover lock bushing As, 10 mm washer and the two 10 mm wave washers. Check the cover lock bushing A for scores, scratches and other damage. Replace the cover lock bushing A with a new one if necessary.
[8] LOCK FRONT SHAFT [1] UNDER COVER FRONT BRACKET [7] COVER LOCK BUSHING A (2) [2] 8 mm WASHER [6] 10 mm WASHER [5] 10 mm WAVE WASHER (2) [4] COVER LOCK LEVER [3] 6 mm E-RING 4-21