honda — Programmed Fuel Injection

BF135A•BF150A 4. Overheat indicator line check -1. Turn the ignition switch OFF. Disconnect the Red ter- minal of the indicator light and connect the Black ter- minal to short. -2. Turn the ignition switch ON and check the overheat indicator light. -3. Turn the ignition switch OFF and connect the indicator light Yellow terminal. -4. Disconnect the remote control harness 14P connector. -5. Check for the continuity between the No.6 (Yellow) and the No. 2 (Black/Yellow) terminals of the remote control harness side 14P connector. Does the overheat indicator light come ON? YES – Repair open in the wire harness (between the ECM and the indicator light). NO – Go to the step 3.

REMOTE CONTROL HARNESS SIDE 14P CONNECTOR -3. Turn the ignition switch OFF and connect the indicator light Red terminal. -4. Disconnect the remote control harness 14P connector. -5. Check for the continuity between the No. 7 (Red) ter- minal and the No. 2 (Black/Yellow) terminal of the remote control harness side 14P connector. BLACK/YELLOW YELLOW VIEWED FROM THE TERMINAL SIDE REMOTE CONTROL HARNESS SIDE 14P CONNECTOR Is there the continuity? YES – Repair open in the main harness. NO – The indicator light is faulty or repair open in the remote control harness wire. BLACK/YELLOW RED VIEWED FROM THE TERMINAL SIDE Is there the continuity? YES – Repair open in the wire of the main harness.

NO – The indicator light is faulty or repair open in the remote control harness. 5. Oil pressure indicator line check -1. Turn the ignition switch OFF. Disconnect the Yellow ter- minal of the indicator light and connect the Black ter- minal to short. -2. Turn the ignition switch ON and check the oil pressure indicator light. Does the oil pressure indicator light come ON? YES – Go to the step 3. NO – Repair open in the wire harness (between the ECM and the indicator light). 5-25