BF135A•BF150A High pressure fuel supply system 9. FUEL SUPPLY SYSTEM • Troubleshooting • Hard to start 1. Fuel line (high pressure side) (P. 5-104) 2. Fuel pump (high pressure side) (P. 5-107) 3. Fuel injector (P. 5-105) When the MIL does not come ON but an engine failure of either of the following symptoms occurs at the engine start or during idling, inspect the system(s) and part(s) in the numbered sequence. Low pressure fuel supply system • Engine starts but stalls soon. 1. Fuel line (high pressure side) (P. 5-104) 2. Fuel injector (P. 5-105) 3. Pressure regulator (P. 5-106) • Hard to start 1. Water separator (P. 3-19) 2. Fuel strainer (low pressure side) (P. 3-15) 3.
Fuel line (low pressure side) (P. 5-104) 4. Vapor separator (P. 5-111 thru. 5-127) • Engine speed is not stable during idling and trolling, or engine stalls. 1. Fuel line (high pressure side) (P. 5-104) 2. Fuel injector (P. 5-105) 3. Pressure regulator (P. 5-106) • Engine starts but stalls soon. 1. Water separator (P. 3-19) 2. Fuel strainer (low pressure side) (P. 3-15) 3. Fuel line (low pressure side) (P. 5-104) 4. Vapor separator (P. 5-111 thru. 5-127) • Engine speed does not increase 1. Fuel line (high pressure side) (P. 5-104) 2. Pressure regulator (P. 5-106) 3. Fuel pump (high pressure side) (P. 5-107) 4. Fuel strainer (high pressure side) (P. 3-18) 5. Fuel injector (P.
5-105) • Engine speed is not stable during idling and trolling, or engine stalls. 1. Water separator (P. 3-19) 2. Fuel strainer (low pressure side) (P. 3-15) • Engine sometimes misfires or tends to stall. 1. Water separator (P. 3-19) 2. Fuel injector (P. 5-105) 3. Fuel pump (high pressure side) (P. 5-107) 4. Pressure regulator (P. 5-106) • Engine sometimes misfires or tends to stall. 1. Water separator (P. 3-19) 2. Fuel strainer (low pressure side) (P. 3-15) 3. Fuel line (low pressure side) (P. 5-104) 4. Fuel pump (low pressure side) (P. 5-142) • Engine tends to stall at hot restart of the engine. 1. Vapor separator (P. 5-111 thru. 5-127) 5-96