honda — Programmed Fuel Injection

BF135A•BF150A 8. Check for the continuity between the terminals of the fuse box harness side 6P connector and ECM con- nectors A and B: Fuse Box 6P connector ECM connector A No.3 (Light green/Red) Is there the battery voltage? YES – Go to the step 6. NO – Blown No.3 (10A) fuse, or faulty ignition switch, or open in the wire between the PGM- FI main relay and the ignition switch. 6. Measure the voltage between the No.2 (White/Yellow) terminal of the harness side 2P connector and the engine ground.

No.13 (Light green/Red) Fuse Box 6P connector ECM connector B No.3 (Light green/Red) No.10 (Light green/Red) HARNESS SIDE 2P CONNECTOR FUSE BOX HARNESS SIDE 6P CONNECTOR FLR2 (LIGHT GREEN/RED) ECM CONNECTOR A WHITE/YELLOW LIGHT GREEN/ RED VIEWED FROM THE TERMINAL SIDE Is there the battery voltage? YES – Go to the step 7. NO – Blown No.3 (10A) fuse, or faulty ignition switch, or open in the wire between the PGM- FI main relay and the ignition switch. FLR1 (LIGHT GREEN/RED) 7. Check for the continuity between the fuse box side 4P connector and ECM connector terminals:

Fuse Box 4P connector ECM connector C No.4 (White/ Black) VIEWED FROM THE TERMINAL SIDE ECM CONNECTOR B Is there the continuity? YES – Go to the step 9. NO – Repair open in the wire between the PGM-FI main relay and the ECM. No.1 (Yellow/Black) No.4 (White/ Black) No.5 (Yellow/Black) ECM CONNECTOR C 9. Turn the ignition switch ON. Measure the voltage between the terminals of the ECM connector C: FUSE BOX SIDE 4P CONNECTOR IGP2 (YELLOW/BLACK) ) No.1 (Yellow/Black) ( ) No.5 (Yellow/Black) ( No.1 (Yellow/Black) ( ) ) No. 2 (Green) ( No. 6 (Green/red) ( ) No.5 (Yellow/Black) ( ) No. 2 (Green) ( IGP2 (YELLOW/BLACK) WHITE/BLACK ) No.

6 (Green/Red) ( ) ECM CONNECTOR A VIEWED FROM THE TERMINAL SIDE Is there the continuity? YES – Go to the step 8. NO – Blown No.4 (15A) fuse, or open in the wire between the PGM-FI main relay and the No.4 (15A) fuse, or open in the wire between the No.4 (15A) fuse and the ECM. VIEWED FROM THE TERMINAL SIDE Is there the battery voltage? YES – End of the check (Good) NO – Replace the PGM-FI main relay. 5-99