honda — Programmed Fuel Injection

BF135A•BF150A c. INSTALLATION [3] FUEL TUBE B [2] TUBE CLIP B11 (2) [1] SENSOR HOSE CLIP [4] 33.2 x 2.4 mm O-RING Do not reuse. [9] FUEL TUBE E [8] TUBE JOINT 6 x 27 (2) [5] FUEL PUMP 12 N·m (1.2 kgf·m, 9 lbf·ft) [7] TUBE CLIP B12 (2) [6] FUEL TUBE D 1) Apply the engine oil to the new O-ring and install it on the fuel pump. [1] " " MARK 6 x 27 (2) 2) Install the fuel pump with the " " mark facing up and tighten the two 6 x 27 mm flange bolts to the specified torque. TORQUE: 12 N m (1.2 kgf m, 9 lbf ft) [2] FUEL PUMP 3) Connect the fuel tube B and D and secure them respectively with the tube clip B1s. [1] FUEL TUBE B 4) Install the L.

side cover bracket and tighten the 8 x 55 mm flange bolt securely. [2] TUBE CLIP B1 (2) 5) After assembly, start the engine and check for the gasoline leakage from the low pressure side fuel pump. [3] FUEL TUBE D 5-143