honda — Programmed Fuel Injection

BF135A•BF150A 14. FUEL PUMP (LOW PRESSURE SIDE) [1] L. SIDE COVER BRACKET Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel. Keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately. 8 x 55 (2) a. REMOVAL 1) Remove the engine cover and the L. engine under cover . [1] TUBE CLAMP (Commercially available) [2] FUEL TUBE B [3] FUEL PUMP 2) Remove the two 8 x 55 mm flange bolts and move the L. side cover bracket a side. 3) Clamp the fuel tubes with a commercially available tube clamps, then disconnect the fuel tubes from the fuel pump.

[4] FUEL TUBE D 4) Remove the two 6 x 27 mm flange bolts and remove the fuel pump. [1] FUEL PUMP 5) Remove the O-rings from the fuel pump. Replace the O-rings with the new ones on assembly. 6 x 27 (2) [2] O-RING (2) Do not reuse. b. INSPECTION Push the plunger to check for smooth operation. Replace the plunger if it is faulty. [1] PLUNGER 5-142