honda — Programmed Fuel Injection

BF135A•BF150A 8) Apply the engine oil to the O-rings and install them on the joint pipe. [1] COLLAR 9) Install the joint pipe on the fuel line. 10) Connect the fuel hose (high pressure side) and tighten the 6 x 25 mm flange bolt securely. [3] FUEL HOSE (HIGH PRESSURE SIDE) [2] O-RING (2) Do not reuse. 6 x 25 11) Connect the 2P connector to each injector. [1] HOSE CLIP 12) Set the three clips of the main harness on the clip brackets. 13) Clamp the pressure regulator return hose and the main wire harness with the hose clip. [2] CLIP [5] CLIP BRACKET [4] INJECTOR 2P CONNECTOR [3] MAIN WIRE HARNESS 5-141