BF135A•BF150A 9) Remove the two 10 x 75 mm flange bolts and the three 10 x 45 mm flange bolts. Remove the exhaust manifold and the exhaust manifold gasket. Replace the gasket on assembly. [1] GASKET Do not reuse. 10 x 45 (3) 10) Remove the O-ring from the exhaust manifold. Replace the O-ring on assembly. [4] EXHAUST MANIFOLD ASSEMBLY 10 x 75 (3) [3] 79.9 x 3.1 mm O-RING Do not reuse. [2] 76.4 x 3.1 mm O-RING Do not reuse. b. DISASSEMBLY/ASSEMBLY [1] EXHAUST MANIFOLD COVER GASKET (2) [2] EXHAUST MANIFOLD COVER (2) 6 x 14 6 x 22 (4) [3] WATER TUBE CLAMP BRACKET Do not reuse. [9] 6 x 18 mm SCREW (2) [8] ANODE METAL (2) Replace with new one if excessively deterio- rated.
[6] A/F SENSOR [7] EXHAUST MANIFOLD DISASSEMBLY/ASSEMBLY: Remove/install the A/F sensor using the special tool. TORQUE: 3.4 N·m (0.35 kgf·m, 2.4 lbf·ft) [5]-1 SENSOR SOCKET WRENCH, 22 x 150 mm 07906-PD10000 [5] ECT SENSOR 3 12 N·m (1.2 kgf·m, 9 lbf·ft) 5-154 [4] O-RING Do not reus e.