BF135A•BF150A c. INSTALLATION [1] CONNECTOR BRACKET 6 x 14 (3) 6 x 55 (3) [2] VTEC SOLENOID VALVE ASSEMBLY 10 x 45 (3) [6] GASKET 10 x 75 (2) Do not reuse. [5] EXHAUST MANIFOLD ASSEMBLY [4] 79.9 x 3.1 mm O-RING Do not reuse. [3] 76.4 x 3.1 mm O-RING Do not reuse. 1) Apply the engine oil to the O-rings and install them on the exhaust manifold assembly. [1] EXHAUST MANIFOLD ASSEMBLY 2) Set the exhaust manifold assembly on the exhaust manifold guide. 3) Set the new gasket. Align the holes located at the lower left side, and loosely tighten the 10 x 75 mm flange bolt as shown. 4) Align the bolt holes by turning the gasket in the direction shown with the arrow. Take care not to damage the gasket.
[2] GASKET 10 x 75 5-155