honda — Alternator

b. REMOVAL [1] ALTERNATOR 4P CONNECTOR Remove the following pars. – Engine cover (P. 4-2) – Silencer duct (P. 6-2) 1) Disconnect the battery negative (-) cable from the battery negative terminal. Disconnect the alternator 4P connector. Disconnect the alternator fuse cable from the alternator assembly. [3] ALTERNATOR B TERMINAL WASHER-NUT [2] ALTERNATOR FUSE CABLE 2) Loosen the 10 x 80 mm flange bolt and the 8 mm flange nut. [1] 8 mm FLANGE NUT 3) Loosen the special adjusting bolt and move the alternator assembly to the engine side as full as it goes.

10 x 80 [3] ALTERNATOR ASSEMBLY [2] SPECIAL ADJUSTING BOLT 4) Detach the alternator belt from the alternator pulley first, then from the crankshaft pulley. [1] ALTERNATOR BELT Remove the alternator belt. [2] CRANKSHAFT PULLEY Do not contaminate the alternator belt with oil and grease after removal. Do not bend the alternator belt. Store the belt by hanging it on the wall. [3] ALTERNATOR PULLEY 6-6