honda — Alternator

e. ALTERNATOR ASSEMBLY DISASSEMBLY [2] 22 mm OFFSET WRENCH 1) Loosen the pulley lock nut using a 22 mm offset wrench and a 10 mm offset wrench. 2) Remove the pulley lock nut and the alternator pulley. [1] 10 mm OFFSET WRENCH [3] PULLEY LOCK NUT [4] ALTERNATOR PULLEY 3) Remove the 6 mm hex. nut from the insulator bushing and remove the insulator bushing. [1] REAR END COVER BOLT (3) 4) Remove the three rear end cover bolts and the rear end cover. [2] REAR END COVER [3] INSULATOR BUSHING [4] 6 mm HEX. NUT 6-9 [3] PULL LOC NUT EY K