5) Remove the two 4 x 6 mm screws from the brush holder assembly and remove the brush holder assembly. [1] BRUSH HOLDER INSULATOR Remove the brush holder insulator from the brush holder assembly. [2] 4 x 6 mm SCREW (2) [3] BRUSH HOLDER ASSEMBLY 6) Remove the two 4 x 25 mm screw-washers and the 4 x 6 mm screw from the IC regulator, then remove the IC regulator. [3] 4 x 6 mm SCREW [2] 4 x 25 mm SCREW- WASHER (4) [1] IC REGULATOR 6-10