honda — Thermostat/Relief Valve/Flush Valve

c. WATER RELIEF TUBE C/RELIEF VALVE DISASSEMBLY 1) Disconnect the 7 x 160 mm tube, 7 x 40 mm tube and the water relief tube C from the engine side. 2) Disconnect each tube from the T-joint. 3) Remove the two 6 x 22 mm flange bolts and remove the relief valve cover and the relief valve. Do not reuse the relief valve cover O-ring. Replace it with a new one on assembly. [1] TUBE CLAMP D10.5 (6) [8] 7 x 160 mm TUBE 6 x 22 (2) [2] WATER RELIEF TUBE C [7] RELIEF VALVE COVER [6] T-JOINT [5] 7 x 40 mm TUBE [4] RELIEF VALVE COVER O-RING [3] RELIEF VALVE d. INSPECTION • RELIEF VALVE 1) Check the rubber part of the relief valve for deterioration and cracks.

Replace the relief valve with a new one if necessary. [1] RELIEF VALVE [2] RELIEF VALVE SPRING 2) Check the operation of the relief valve spring and replace the relief valve with a new one if necessary. [3] RUBBER PART 8-6