honda — Crankshaft Pulley/Cam Chain

6) Disconnect the CKP sensor 3P connector from the CKP sensor. [1] CKP SENSOR 3P CONNECTOR [2] CKP SENSOR 7) Loosen the 16 x 49 mm bolt-washer using the special tools as shown. TOOLS: Handle 07JAB-001020B Pulley holder attachment, HEX 50 mm 07JAB-0010400 Socket wrench, 19 mm 07JAA-001020A [1] PULLEY HOLDER ATTACHMENT, HEX 50 mm 07JAB-0010400 [2] HANDLE 07JAB-001020B [3] SOCKET WRENCH, 19 mm 07JAA-001020A 8) Remove the 16 x 49 mm bolt-washer and remove the crankshaft pulley and the 4.5 x 21 mm key. [1] 16 x 49 mm BOLT-WASHER [2] CRANKSHAFT PULLEY [3] 4.5 x 21 mm KEY 9-3