4) Install the chain case by tightening the three 6 x 14 mm flange bolts to the specified torque. TORQUE: 12 N . m (1.2 kgf . m, 9 lbf . ft) 5) Position a new 15 x 1.9 mm O-ring on the CKP sensor and apply engine oil to the O-ring. Install the CKP sensor by tightening the 6 x 16 mm flange bolt securely. 6 x 14 (3) 12 N . m (1.2 kgf . m, 9 lbf . ft) [4] 43 x 58 x 7 mm OIL SEAL [5] 15 x 1.9 mm O-RING [6] CKP SENSOR 9-10 [2] CHAIN CASE COV N CASE [3] (Apply grease to the lip.) 16 6 x 16 [2] CHAIN CASE COV ER