honda — Crankshaft Pulley/Cam Chain

4) Install the cam chain aligning the color plate (one) with the ” mark (or punch mark) on the crankshaft sprocket as shown. 5) Holding the hexagonal part of both the intake and exhaust camshafts with the wrench or equivalent tool as shown, align the “ ” mark on the exhaust camshaft sprocket with the “ ” mark on the intake camshaft sprocket. (The No.1 piston is at the top dead center of its compression stroke.) [1] [2] [3] HEXAGONAL PART 6) Check that the punch mark on the intake camshaft sprocket and the punch mark on the exhaust camshaft sprocket are in the position shown.

7) Holding the No.1 cylinder at the top dead center of its compression stroke and the punch marks in alignment as described in step 5, align each punch mark on the intake and exhaust camshaft sprockets with the mid point of the corresponding color plates (2 places) of the cam chain, and install the cam chain. [4] PUNCH MARKS NOTICE Turn the intake camshaft and the exhaust camshaft while holding the hexagonal part of the intake and exhaust camshafts with the wrench or equivalent tool and thereby aligning the alignment marks on both the intake and exhaust camshaft sprockets.

Install the cam chain aligning the mid point of the two color plates with the punch mark on the intake/exhaust camshaft sprockets. [5] EXHAUST CAMSHAFT SPROCKET [6] “ ” MARKS [7] INTAKE CAMSHAFT SPROCKET Check that the color plate (one) of the crankshaft sprocket is not out of alignment. [8] COLOR PLATES (2 places) After installing the cam chain, check that the crankshaft sprocket and the camshaft sprocket are in alignment with the No.1 piston at the top dead center of its compression stroke. [9] CAM CHAIN [4] PUNCH MARKS 9-12 [1] CAM CHAIN 2] “ ” MARK [3] COLLAR PLATE (or punch mark) (1 place) 2] “ ” MARK (or punch mark)