7) Using a hex. wrench, loosen the 14 mm sealing bolt that tightens the camshaft collar. [1] CAMSHAFT COLLAR [2] 14 mm SEALING BOLT 8) Remove the VTC flange bolt from the intake camshaft sprocket. Remove the intake camshaft sprocket from the intake camshaft. [2] INTAKE CAMSHAFT SPROCKET [1] VTC FLANGE BOLT [3] INTAKE CAMSHAFT 9) Secure the hex. part of the exhaust camshaft with a wrench or equivalent tool. [1] EXHAUST CAMSHAFT 10-6