DISASSEMBLY OF ROCKER ARM ASSEMBLY BF150A: NOTICE Note the location of each part before disassembly. Do not confuse the parts and install them in their original positions. Check the camshaft contact surface of each rocker arm for wear or damage. Insert the bolts in the rocker shaft holders before removing or installing the rocker arm assembly from/on the cylinder head. Apply molybdenum disulfide oil to the outer surface of the intake/exhaust rocker shafts on assembly.
[1] MOLYBDENUM DISULFIDE OIL [2] INTAKE ROCKER ARM ASSEMBLY [3] EXHAUST ROCKER ARM [1] MOLYBDENUM DISULFIDE OIL [4] No.1 ROCKER SHAFT HOLDER [5] No.2 ROCKER SHAFT HOLDER [6] No.3 ROCKER SHAFT HOLDER [7] No.4 ROCKER SHAFT HOLDER [8] EXHAUST ROCKER SHAFT [9] No.5 ROCKER SHAFT HOLDER 10-11 [11] INTAKE ROCKER SHAFT [10] RUBBER BAND