honda — Cylinder Heads/Valves

BF135A: Note the location of each part before disassembly. Do not confuse the parts and install them in their original positions. Check the camshaft contact surface of each rocker arm for wear or damage. Insert the bolts in the rocker shaft holders before removing or installing the rocker arm assembly from/on the cylinder head. NOTICE Apply molybdenum disulfide oil to the outer surface of the intake/exhaust rocker shafts on assembly.

[2] INTAKE ROCKER ARM ASSEMBLY [3] EXHAUST ROCKER ARM [1] MOLYBDENUM DISULFIDE OIL [1] MOLYBDENUM DISULFIDE OIL [4] No.1 ROCKER SHAFT HOLDER [5] No.2 ROCKER SHAFT HOLDER [6] No.3 ROCKER SHAFT HOLDER [7] No.4 ROCKER SHAFT HOLDER [11] INTAKE ROCKER SHAFT [8] EXHAUST ROCKER SHAFT [10] RUBBER BAND [9] No.5 ROCKER SHAFT HOLDER 10-12