BF135A•BF150A From P. 2-28 (A) From P. 2-28 (B) NO Check for open circuit in the fuel pump power line. 1 Disconnect the main relay 2P connector. 2 Check for continuity between the No. 1 (Blue/Red) terminal of the harness side main relay 2P con- nector and the No. 1 (Blue/Red) terminal of the fuel pump 2P con- nector. Replace or repair the wire har- ness (Open circuit in the fuel pump power line). PGM-FI main relay harness side 2P connector Fuel pump harness side 2P connector Viewing from terminal side Is there continuity? Check the (high pressure) fuel pump (P. 5-107). Is the fuel pump normal? Replace the (high pressure) fuel pump. NO Substitute a known-good ECM and recheck.
NO Repair the faulty part. Repair the faulty part. NO 2-29 Y ES Y ES Check the low pressure fuel system (P. 5-96). Is the low pressure fuel system nor- mal? Y ES Check the high pressure fuel system (P. 5-96). Is the high pressure fuel system nor- mal? Y ES Perform idle control system trouble- shooting. If it is normal, Substitute a known-good ECM and recheck