honda — Service Information

BF135A•BF150A f. CHARGING SYSTEM • BATTERY UNDER CHARGED NO Adjust the alternator belt tension (P. 3-29). YES Replace the battery. NO Replace or repair the wire harness (Open in the wire between the alternator and No. 5 fuse). NO Replace or repair the wire harness (Open in the wire between the alternator and the igni- tion switch). 2-30 Is the alternator belt tension correct (Inspection: P. 3-29)? Y ES Start the engine and let it idle to warm up. Measure the voltage between the battery terminals when the engine speed is 3,000 min-1 (rpm). Is the voltage between the terminals 13.5V or above? N O Check for open circuit in the IG line.

1 Turn the ignition switch OFF and discon- nect the alternator 4P connector. 2 Measure the voltage between the No. 2 (Yellow/Red) terminal of the alternator 4P connector and the engine ground. Alternator harness side 4P connector Viewing from terminal side Is there the battery voltage with the ignition switch ON? Y es Check for open circuit in the BAT line. 1 Turn the ignition switch OFF and discon- nect the alternator 4P connector. 2 Measure the voltage between the No. 1 (White/Black) terminal of the alternator 4P connector and the engine ground. Alternator harness side 4P connector Viewing from terminal side Is there the battery voltage with the ignition switch ON?

Y es Disassemble and service the alternator (P. 6-9).