honda — Cylinder Heads/Valves

6. CYLINDER HEAD ASSEMBLY DISASSEMBLY [1] PLASTIC HAMMER [2] SOCKET Mark each removed parts and store them securely classifying them into the groups of the intake side and the exhaust side of each cylinder. Install each part in the original position on assembly. NOTICE 1) Use the socket that matches the diameter of the valve spring retainer. Attach the socket to the retainer and lightly tap on the socket to separate the valve keepers from the retainer. NOTICE Tap at right angles with each valve stem head. Take care not to bend the valves. Support the cylinder head with a suitable material to prevent damage to the valve.

[1] VALVE SPRING COMPRESSOR ATTACHMENT 07757-PJ10100 [2] VALVE SPRING COMPRESSOR 07757-0010000 2) Change the attachment of the special tool as shown. TOOLS: Valve spring compressor 07757-0010000 Valve spring compressor attachment 07757-PJ10100 [3] ADAPTER 3) Compress the valve springs using the special tools as shown. TOOLS: Valve spring compressor 07757-0010000 Valve spring compressor attachment 07757-PJ10100 [1] VALVE SPRING COMPRESSOR ATTACHMENT, 07757-PJ10100 NOTICE Take care not to let the special tools contact the cylinder head. Do not compress the valve springs more than necessary as it causes weak valve spring. [2] VALVE SPRING COMPRESSOR 07757-0010000 10-20