honda — Cylinder Heads/Valves

11. CYLINDER HEAD ASSEMBLY INSTALLATION [1] PROJECTION [2] CYLINDER HEAD GASKET Do not let any foreign material enter the gap between the gasket, cylinder head and the cylinder block. Take care not to damage (scores, scratches, etc.) the cylinder head and the cylinder block at the mating surface with the gasket. Do not bend the cylinder head gaskets as they are the metal gaskets. Keep the cam chain away from the magnetic parts. NOTICE 1) Clean the cylinder head and cylinder block mounting surfaces. 2) Install the two dowel pins on the cylinder block. Install a new cylinder head gasket on the cylinder block by setting the projection of the cylinder head gasket in the position shown.

[3] 14 x 20 mm DOWEL PIN (2) 3) Align the “ ” mark on the crankshaft sprocket with the ” mark on the cylinder block. [1] CRANKSHAFT SPROCKET [2] “ ” MARKS 4) Align the dowel pins on the cylinder block with the dowel pin installation positions of the cylinder head assembly as shown, and install the cylinder head assembly on the cylinder block. [1] CYLINDER HEAD ASSEMBLY 10-32