honda — Cylinder Heads/Valves

10) Secure the hex. part of the exhaust camshaft with a wrench or equivalent tool. [1] EXHAUST CAMSHAFT 11) Install the exhaust camshaft sprocket on the exhaust camshaft by aligning the concave in the exhaust camshaft sprocket with the dowel pin on the exhaust camshaft. Tighten the 10 x 32 mm flange bolt on the exhaust camshaft to the specified torque. [1] EXHAUST CAMSHAFT SPROCKET [2] CONCAVE [3] EXHAUST CAMSHAFT TORQUE: 72 N . m (7.3 kgf . m, 53 lbf . ft) [4] DOWEL PIN 12) Secure the hex. part of the intake camshaft with a wrench or equivalent tool. [1] INTAKE CAMSHAFT 10-36