honda — Cylinder Heads/Valves

10) Connect the oil tube to the mounting case. After connection, check that the oil tube is inserted in the mounting case securely. [1] OIL TUBE [2] MOUNTING CASE 11) Install the R. side cover bracket assembly on the engine assembly and tighten the two 6 x 22 mm flange bolts. [1] R. SIDE COVER BRACKET ASSEMBLY 6 x 22 (2) 12) Connect the breather tube and the main wire harness to the cylinder head cover. [1] PROJECTION Route the main wire harness so it sets on the projections on the cylinder head cover securely. NOTICE 13) Install the following parts. – Ignition coil/spark plug (P. 3-8) – L./R. engine under covers (P. 4-14) – Engine cover (P.

4-2) [2] MAIN WIRE HARNESS [3] BREATHER TUBE [2] MAIN WIRE HARNESS 10-42