7) Tighten the 6 mm hex. cap nuts to the specified torque in the numbered sequence in two or three steps. TORQUE: 12 N . m (1.2 kgf . m, 9 lbf . ft) ③ ④ ① ② ⑤ ⑥ 8) Move the water relief tube A from the other side of the projection on the cylinder head cover to your side. [1] WATER RELIEF TUBE A [2] PROJECTION [3] CYLINDER HEAD COVER 9) Connect the fuel tube B and D to the fuel pump (low pressure side). [1] TUBE CLIPS (Commercially available) [2] FUEL TUBE B [3] FUEL PUMP (Low pressure side) [4] FUEL TUBE D 10-41