honda — Service Information

BF135A•BF150A YES YES Snap the engine (4,000 min -1 /rpm or above under no load) and check the oil indicator and warning buzzer. Do the oil indicator light come ON and the buzzer stop sound- ing? Normal (End of inspection) Disconnect the high pressure side oil pressure switch 2P con- nector. Do the oil indicator light come ON and the buzzer stop sound- ing? YES Replace the oil pressure switch. Check for short in the high pres- sure side oil pressure switch line. 1 Turn the ignition switch OFF. 2 Check for continuity between the No. 1 (Green/Red) termi- nal of the harness side oil pressure switch 2P connec- tor and the engine ground.

YES Replace or repair the wire har- ness (Short in the wire har- ness between the high pres- sure side oil pressure switch and ECM). Oil pressure switch 2P connector Viewing from terminal side Is there continuity? Substitute a known-good ECM and recheck. NO Check for short in the low pres- sure side oil pressure switch line. 1 Turn the ignition switch OFF. 2 Check for continuity between the oil pressure switch ter- minal and the engine ground. Is there continuity? NO Replace or repair the wire har- ness (Short in the wire har- ness between the low pres- sure side oil pressure switch and ECM). Substitute a known-good ECM and recheck. 2-34 From P. 2-33 Start the engine.

Is the oil indicator light ON with the engine idling? N O Disconnect the low pressure side oil pressure switch wire. Do the oil indicator light come ON and the warning buzzer stop sounding? Y ES To P. 2-35 N O N O N O Y ES