honda — Cylinder Block/Crankshaft/Pistons

1. DISASSEMBLY a. LOWER BLOCK/CRANKSHAFT/CYLINDER BLOCK Remove the following parts. – Engine cover (P. 4-2) – L./R. engine under covers (P. 4-9) – Cylinder head assembly (P. 10-19) – Engine assembly (P. 7-2) – Oil pump (P. 11-6) – Flywheel (P. 11-12) – Crankcase/balancer case assembly (P. 12-2) 1) Loosen the bolts in the numbered sequence in two or three steps. ② ① ⑥ ⑤ ⑩ ⑨ ⑭ ⑬ ⑪ ⑫ ⑦ 2) Remove the four 8 x 50 mm flange bolts and ten 8 x 35 mm flange bolts from the lower block. ⑧ ③ ④ 3) Loosen the ten 11 x 95 mm washer bolts in the numbered sequence in two or three steps. 4) Remove the ten 11 x 95 mm washer bolts from the lower block.

② ① ⑥ ⑤ ⑩ ⑨ ⑦ ⑧ ③ ④ 5) Insert the screwdriver into the recesses of the lower block and raise the lower block little by little. 13-2 [1] RECESS [1] RECESS