• CONNECTING ROD BIG END AXIAL CLEARANCE • CRANKSHAFT MAIN JOURNAL O.D. [1] NO.2 MAIN JOURNAL [2] NO.4 MAIN JOURNAL [5] NO.1 MAIN JOURNAL [4] NO.3 MAIN JOURNAL [3] NO.5 MAIN JOURNAL • CRANK PIN JOURNAL O.D. [1] CRANK PINS • CRANKSHAFT JOURNAL (MAIN, PIN) ROUNDNESS Measure the crankshaft main journal O.D. and the crank pin O.D. in the A and B directions. Calculate the gap between the measurements to determine the roundness. [1] ROUNDNESS (Measure at the center of the journal.) [2] ROUNDNESS: B • CRANKSHAFT JOURNAL (MAIN, PIN) CILINDRICITY Measure the crankshaft main journal O.D. and the crank pin O.D. at the points A and B.
Calculate the gap between the measurements to determine the cylindricity. A [3] CYLINDRICITY: A B [4] CYLINDRICITY (Measure at both ends of the journal.) 13-11 STANDARD SERVICE LIMIT 0.15 – 0.35 mm (0.006 – 0.014 in) 0.4 mm (0.02 in) STANDARD SERVICE LIMIT No.1, 2, 4, 5, 54.984 – 54.992 mm (2.1647 – 2.1650 in) No.3 54.976 – 55.000 mm (2.1644 – 2.1654 in) STANDARD SERVICE LIMIT 47.976 – 48.000 mm (1.8888 – 1.8898 in) STANDARD SERVICE LIMIT 0.005 mm (0.0002 in) Max. 0.010 mm (0.0004 in) STANDARD SERVICE LIMIT 0.005 mm (0.0002 in) Max. 0.010 mm (0.0004 in)