honda — Propellor/Gear Case/Extension Case/Oil Case

4. PROPELLER SHAFT HOLDER ASSEMBLY [*1] [2] PROPELLER SHAFT HOLDER ASSEMBLY a. REMOVAL/INSTALLATION Remove the following parts. – Propeller (P. 14-2) – Gear case assembly (P. 14-3) – Water pump/shift rod (P. 14-7) 1) Remove the two 10 mm washers and the two 10 x 40 mm flange bolts. 2) Insert a screwdriver or equivalent tool into the recess in the propeller shaft holder and remove the propeller shaft holder assembly from the gear case. [1] RECESS Installation is the reverse order of removal. [2] PROPELLER SHAFT HOLDER ASSEMBLY [3] 10 mm WASHER (2) [1] GEAR CASE ASSEMBLY 10 x 40 (2) 34 N . m (3.5 kgf . m, 25 lbf . ft) 14-17