5. PROPELLER SHAFT/PROPELLER SHAFT HOLDER [*1] [1] 8 x 47 mm SHIFTER PIN [2] CLUTCH SHIFTER a. DISASSEMBLY Remove the following parts. – Propeller (P. 14-2) – Gear case assembly (P. 14-3) – Water pump/shift rod (P. 14-7) – Propeller shaft holder assembly (P. 14-17) 1) Remove the cross pin ring and the 8 x 47 mm shifter pin, then remove the clutch shifter. [3] CROSS PIN RING 2) Remove the shift slider assembly and the two #7 steel balls from the propeller shaft. Take care not to lose the steel balls. [2] SHIFT SLIDER ASSEMBLY [1] PROPELLER SHAFT [3] #7 STEEL BALL (2) 3) Remove the 14 mm circlip from the shift slider assembly. [1] SHIFT SLIDER ASSEMBLY [2] 14 mm CIRCLIP 14-18