14-58 4) Remove the 3 x 12.8 mm roller from the shift slider assembly using a commercially available pin driver. [1] 3 x 12.8 mm ROLLER [2] SHIFT SLIDER ASSEMBLY 5) Remove the shift plate from the shift slider, then remove the two shift springs and the two #9 steel balls. NOTICE [2] Take care not to let the shift springs and the #9 steel balls #9 STEEL BALLS pop out of the shift slider during removal of the shift plate. [1] SHIFT SLIDER [3] SHIFT PLATE [4] SHIFT SPRINGS 6) Prepare the fixing tool of the dimensions shown. 60 mm (2.4 in) ø10 (0.4 in) 300 mm (11.8 in) ø35 (1.4 in) 30 mm ø10 (1.2 in) (0.4 in) 69.5 mm (2.74 in) 69.5 mm (2.74 in) [1] 3 x 12.8 mm ROLLER [2] SHIFT SLIDER ASSEMBLY