22) Check the needle bearing for abnormal sound and play before removal. Replace the needle bearing if necessary. 23) Remove the needle bearing from the propeller shaft using the special tools as shown. Replace the needle bearing with a new one on assembly. [1] REMOVER WEIGHT 07741-0010201 [2] REMOVER HANDLE 07936-3710100 TOOLS: Remover weight 07741-0010201 Remover handle 07936-3710100 Bearing remover, 30 mm 07936-8890300 [4] PROPELLER SHAFT HOLDER [3] BEARING REMOVER, 30 mm 07936-8890300 b. INSPECTION • CLUTCH SHIFTER Check the clutch part of the forward and reverse sides for wear and damage [1] CLUTCH PARTS • PROPELLER SHAFT O.D.
[1] AT REVERSE BEVEL GEAR [2] AT NEEDLE BEARING 14-61 STANDARD SERVICE LIMIT At reverse bevel gear 24.987 – 25.000 mm (0.9837 – 0.9843 in) 24.966 mm (0.9829 in) At needle bearing 30.007 – 30.020 mm (1.1814 – 1.1819 in) 29.990 mm (1.1807 in)