honda — Propellor/Gear Case/Extension Case/Oil Case

14-80 • Pinion gear shim selection table [3] Unit:

mm (in) [2] Calculation value +0.41 (+0.0161) – +0.35 (+0.014) +0.35 (+0.014) – +0.30 (+0.0118) +0.30 (+0.0118) – +0.25 (+0.010) +0.25 (+0.010) – +0.20 (+0.008) +0.20 (+0.008) – +0.15 (+0.006) +0.15 (+0.006) – +0.10 (+0.004) +0.10 (+0.004) – +0.05 (+0.002) [1] Engagement mark on the gear case F 0.30 (0.0118) 0.35 (0.014) 0.40 (0.0157) 0.45 (0.018) 0.50 (0.020) 0.55 (0.022) 0.60 (0.024) E 0.25 (0.010) 0.30 (0.0118) 0.35 (0.014) 0.40 (0.0157) 0.45 (0.018) 0.50 (0.020) 0.55 (0.022) D 0.20 (0.008) 0.25 (0.010) 0.30 (0.0118) 0.35 (0.014) 0.40 (0.0157) 0.45 (0.018) 0.50 (0.020) C 0.15 (0.006) 0.20 (0.008) 0.25 (0.010) 0.30 (0.0118) 0.35 (0.014) 0.40 (0.0157) 0.45 (0.018) B 0.10 (0.004) 0.15 (0.006) 0.20 (0.008) 0.25 (0.010) 0.30 (0.0118) 0.35 (0.014) 0.40 (0.0157) A 0.10 (0.004) 0.15 (0.006) 0.20 (0.008) 0.25 (0.010) 0.30 (0.0118) 0.35 (0.014) [3] Unit:

mm (in) [2] Calculation value +0.05 (+0.002) – ±0 (±0.000) ±0 (±0.000) – –0.05 (–0.002) –0.05 (–0.002) – –0.10 (–0.004) –0.10 (–0.004) – –0.15 (–0.006) –0.15 (–0.006) – –0.20 (–0.008) –0.20 (–0.008) – –0.25 (–0.010) –0.25 (–0.010) – –0.31 (–0.0122) [1] Engagement mark on the gear case F 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) 0.85 (0.033) 0.90 (0.035) 0.95 (0.037) E 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) 0.85 (0.033) 0.90 (0.035) D 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) 0.85 (0.033) C 0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) B 0.45 (0.018) 0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) A 0.40 (0.0157) 0.45 (0.018) 0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) • How to read shim selection table When the engagement mark on the gear case is E and the calculation value is –0.20 mm (–0.008 in) or more, the shim thickness is 0.80 mm (0.031 in).

When the calculation value is less than –0.20 mm (–0.008 in), the shim thickness is 0.85 mm (0.033 in). (See Shim selection table above.) [3] Unit:

mm (in) [2] Calculation value +0.05 (+0.002) – ±0 (±0.000) ±0 (±0.000) – –0.05 (–0.002) –0.05 (–0.002) – –0.10 (–0.004) –0.10 (–0.004) – –0.15 (–0.006) –0.15 (–0.006) – –0.20 (–0.008) –0.20 (–0.008) – –0.25 (–0.010) –0.25 (–0.010) – –0.31 (–0.0122) [1] Engagement mark on the gear case F 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) 0.85 (0.033) 0.90 (0.035) 0.95 (0.037) E 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) 0.85 (0.033) 0.90 (0.035) D 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) 0.85 (0.033) C 0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) 0.80 (0.031) B 0.45 (0.018) 0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) 0.75 (0.030) A 0.40 (0.0157) 0.45 (0.018) 0.50 (0.020) 0.55 (0.022) 0.60 (0.024) 0.65 (0.026) 0.70 (0.028) • Shim combination To obtain 0.75 mm (0.030 in) of shim thickness, combine three gear shim As and one gear shim B and one gear shim C, or combine one gear shim A, one gear shim B and one gear shim D by referring to the shim type table.