honda — Propellor/Gear Case/Extension Case/Oil Case

b. FORWARD BEVEL GEAR SHIM 1) Assemble the outer race and the inner race of the 50 x 90 x 28 mm taper bearing, and turn the outer race two or three turns. [1] OUTER RACE 2) Measure the bearing height (distance F) from the outer race end to the inner race end as shown, and record the measurement. [2] INNER RACE 3) Measure the inner race height (distance K) as shown, and record the measurement. 4) Determine the calculation value using the bearing height (distance F), inner race height (distance K) and the following formula. Formula: Bearing height (distance F) – Inner race height (distance K) = Calculation value Example:

When, bearing height (distance F) is 28.05 mm (1.104 in), And, inner race height (distance K) is 28.00 mm (1.102 in): 28.05 – 28.00 = 0.05 Therefore, the calculation value is 0.05 mm (0.002 in). 5) Check the calculation value and select the shim of the appropriate thickness from the shim selection table accordingly. Shim type table [1] 50 x 90 x 28 mm TAPER BEARING (INNER RACE) Forward bevel gear shim selection table [3] Unit: mm (in) Refer to page 14-80 for information on shim combination.

14-81 [1] Shim type [2] Thickness [3] Forward bevel gear shim A 0.10 mm (0.004 in) [4] Forward bevel gear shim B 0.15 mm (0.006 in) [5] Forward bevel gear shim C 0.30 mm (0.012 in) [6] Forward bevel gear shim D 0.50 mm (0.020 in) [1] Calculation value [2] Shim thickness +0.15 – +0.10 (+0.006 – +0.004) 0.35 (0.014) +0.10 – +0.05 (+0.004 – +0.002) 0.40 (0.016) +0.05 – ±0 (+0.002 – ±0.000) 0.45 (0.018)