honda — Power Trim/Tilt Assembly

1) Remove the 6 x 8 mm screw and the ground cable. [1] 6 x 8 mm SCREW Remove the 39 mm external circlip. [3] 39 mm EXTERNAL CIRCLIP [2] GROUND CABLE 2) Put a mark on the mount frame so it aligns with the ”mark on the lower mount center housing. [1] “ ” MARK [2] MOUNT FRAME [4] LOWER MOUNT CENTER HOUSING [3] MARK 3) Remove the lower mount center housing using a hydraulic press and the special tools as shown. [2] PRESS TOOLS: Driver 07749-0010000 Attachment, 32 x 35 mm 07746-0010100 Pilot, 30 mm 07746-0040700 [1] DRIVER 07749-0010000 [3] PILOT, 30 mm 07746-0040700 [5] ATTACHMENT, 32 x 35 mm 07746-0010100 [4] LOWER MOUNT CENTER HOUSING 15-22