honda — Power Trim/Tilt Assembly

4) Remove the mount frame and the 34 mm thrust washer from the swivel case. [1] MOUNT FRAME Remove the 40 mm wave washer. [2] SWIVEL CASE [4] 34 mm THRUST WASHER [3] 40 mm WAVE WASHER 5) Check the 39.5 x 52 x 6 mm oil seal lip for cut and replace if necessary before removing the oil seal. [1] SWIVEL CASE LINER (2) Remove the 39.5 x 52 x 6 mm oil seal from the swivel case using a commercially available oil seal remover. Replace the oil seal with a new one on assembly. 6) Remove the two swivel case liners from the swivel case. [2] SWIVEL CASE [3] 39.5 x 52 x 6 mm OIL SEAL 15-23