honda — Power Trim/Tilt Assembly

21) Remove the piston rod comp. from the cylinder comp. [1] CYLINDER COMP. [2] PISTON ROD COMP. 22) Remove the O-rings from the cylinder cap and the piston rod comp. Replace the O-rings with the new ones on assembly. [3] CYLINDER CAP [4] O-RINGS 23) Remove the free piston from the cylinder comp. [1] FREE PISTON Check the sliding surface of the free piston for wear and damage. Replace the free piston if necessary. [2] BACKUP RING 24) Remove the backup ring and the O-ring from the free piston. [4] O-RING Replace the backup ring and the O-ring as a set on assembly. [3] CYLINDER COMP. Drain the residual Automatic Transmission Fluid (ATF) from the cylinder comp. c.

INSPECTION [1] POWER TILT MOTOR 2P CONNECTOR • POWER TILT MOTOR Check for continuity between the terminals. 15-40